Construction Industry Training Network

Estimating with Bluebeam Revu - Burnaby
2019-02-26 08:00 - 17:00 (America/Vancouver) | Accent Inn, 3777 Henning Drive, Burnaby, British Columbia, V5C 6N5, Canada
This full-day training course provides you and your staff with the knowledge and skills to accurately estimate construction quantities and costs using Bluebeam Revu.
This course includes all of the new estimating features included in Bluebeam Revu 2017.
Topics covered include:
• Estimating Tool Sets & Profiles
• Layers
• Setting Drawing Scale
• Viewports
• Length Measurements
• Area and Volume Measurements
• Dynamic Fill
• Count Measurements
• Using the Markups List for Estimating
• Quantity Link to Excel
• Sketch to Scale
• Legends
Attendees will receive a best practice guide to keep and reference back to.
Taking the Bluebeam Revu Basics course is not mandatory as a prerequisite, however it is strongly recommended. Several of the topics taught in these courses are built on the foundation of several topics taught in the basics course.

Instructor:
The course will be taught by Morgan Garry, a former Senior Estimator with one of Canada’s largest general contractors. Morgan has a Bachelor of Science degree in Construction Management from BYU-Idaho and over 10 years of commercial construction experience in project management and estimating. Morgan is also the first and only Bluebeam Certified Instructor in Canada.

What previous participants have said:
“Learned a number of practical and efficient ways of measuring electrical device and length of conduit runs.”
“Morgan is a great instructor. Very patient and extremely knowledgable.”

“Overall a very rewarding and valuable tool for my contractors.”
“Great content, not too much but detailed enough to be very useful.”
IMPORTANT: You will need to provide your own laptop with Bluebeam Revu installed and a scroll wheel mouse. You can download the software for a trial version for 30 days at http://www.bluebeam.com/InstRevuTRIAL

If you don’t have your own laptop with Bluebeam Revu, we can provide a training laptop for the day ($25 rental fee). The total number of training laptops is limited and will be provided to those who reserve them first.

To reserve a training laptop, email or call Kerry at 604-293-2339 or kerry.vital@trainingnetwork.ca
Register Now!

Rigging Fundamentals (Fulford Certification) - Prince George
2019-03-06 07:30 - 16:30 | ICBA Office (Prince George), 2666 Queensway, Prince George, British Columbia, V2L 1N2, Canada
This Rigging Fundamentals course is designed for anyone who rig loads for lifting by cranes and other hoisting equipment.

Course objectives

Identify safe rigging practices
Conduct prior to use inspections
Understand basic rigging principles
Load weight determination
Turning Loads

Topics covered:

Rigging terminology
Determining load weight
Locating the load’s centre of gravity (COG)
Communicating with hand signals
Knot tying
Inspecting slings and hardware
Using rigging working load limit charts
Application of common hitches
Basic lift planning
Rigging and signaling lifts

Participants will receive the following Fulford materials:

Rigging Fundamentals Manual
Lift Planning Guide
Rigging Fundamentals Certificate of Completion wallet card (no photo) – valid for 3 years

Register Now!

Introduction to Blueprint Reading - Abbotsford
2019-03-20 08:00 - 16:30 | Sandman Hotel and Suites Abbotsford, 32720 Simon Avenue, Abbotsford, BC, V2T 0B8, Canada
Participants will learn how to read a set of construction blueprints and specifications. Using both residential and commercial samples of blueprints, participants will gain experience and practical knowledge for their day-to-day work in construction companies. This course is ideal for those who have little or no background in blueprint reading. At the end of the course participants will be able to:

Have an elementary knowledge of blueprint reading as it relates to building construction projects
Understand in general terms the design process and the role of design professionals
Understand how Building Codes and Bylaws impact blueprints
Understand specifications and the contractual hierarchy
Be able to find trade information using blueprints
Be able to answer basic construction questions related to the layout and installation of materials
Be able to identify elementary problems or short comings of the blueprints you are using
Be familiar with architectural, civil, electrical and mechanical drawings, and how they fit together
Understand and be able to use architectural & engineering scales
Understand how to convert engineering dimensions to architectural
Know what a floor plan, section and elevation are
Understand symbols, notation, abbreviations and material schedules
Be able to work with the drawings to obtain basic information on dimension, finishes, details, area calculations, and the ability to do simple material take offs
Be familiar with both commercial and residential blueprints

Topics to be covered:

Blueprint reading basics
Design process and the role of design professionals
Building Codes, bylaws and building permits
Find trade information using blueprints
Layout basics
Architectural, civil, electrical and mechanical drawings, and how they fit together
Architectural & engineering scales
Floor plans, sections and elevations
Symbols, notation, abbreviations and material schedules
Dimension, finishes, details, area calculations, and material take offs
Understanding specifications
Commercial and residential blueprints

Register Now!

Introduction to Blueprint Reading - Burnaby
2019-04-03 08:00 - 16:30, 2019-06-07 08:00 - 16:30, 2019-09-18 08:00 - 16:30 | Accent Inn, 3777 Henning Drive, Burnaby, British Columbia, V5C 6N5, Canada

Rigging Fundamentals (Fulford Certification) - Fort St John
2019-04-09 07:30 - 16:30 | Quality Inn Northern Grand, 9830 100th Avenue, Fort St John, British Columbia, V1J 1Y5, Canada

SOLD OUT! Microsoft Project - Burnaby
2019-04-11 08:00 - 2019-04-12 16:30 | Accent Inn, 3777 Henning Drive, Burnaby, British Columbia, V5C 6N5, Canada
The main objective of this 2-day course is to introduce the commands, functions, and capabilities of Microsoft Project. It is designed for computer users who are new to Microsoft Project who want to gain a thorough understanding of one of the world’s most popular project management software packages.

The following list summarizes skills that participants will be comfortable with after this course.

Understanding Views, Screen Tips, Ribbon, and the Quick Access toolbar;
Create, edit and outline a task list, establish dependencies by linking tasks
Add and assign resources, work with project calendars, and enter project costs
Print project information and customize reports
Apply task type settings, set task constraints
Apply preset and custom contours, edit resource assignments and set and modify a baseline
Track and report on an active project and compare to baseline
Sort, filter, and group views
Format views and the Gantt chart
Customize Microsoft project elements including tables, views, and reports
Use sample templates, create custom templates, and use the organizer to manage project elements
Display progress lines, apply earned value tables, and conduct pert analysis
Create master projects, insert and work with subprojects, and create links to external tasks
Running multiple projects with a common resource pool

This hands-on course is taught by a certified Microsoft Master Instructor. Participants will receive authorized Microsoft manuals and Microsoft approved practice exercises.
All participants will be provided with laptops.
Max participants: 12

What previous participants said:
“Well instructed, good pace.”
“Very knowledgeable and good teacher!”
“Course was laid out in a very logical and easy to follow manner.”
“I have been involved in more than my share of industry education and training across the country and can say taking your course provided genuine value and added tools for advancement.”
“Not only did you bring your in-depth knowledge of MS Project, but provided a real benefit to learn under your personal approach and understanding of the audience, both in their industry and skill sets.”
Register Now!

Introduction to Blueprint Reading - Kamloops
2019-04-12 08:00 - 16:30 | Fairfield Inn and Suites, 1475 Hugh Allen Drive, Kamloops, BC, V1S 1J3, Canada

Microsoft Excel for Business - Prince George
2019-05-06 08:00 - 16:30 | ICBA Office (Prince George), 2666 Queensway, Prince George, British Columbia, V2L 1N2, Canada
Learn to use Excel to create budgets, track costs and generate quotes. Learn tools and ideas that will save time and create professional looking proposals and plans. Participants with only a very basic knowledge of Excel will quickly progress to create basic databases, budgets, graphs, reports and the fundamentals of building equations.

The following list summarizes skills that participants will be comfortable with after this course:

Customize excel options and views
Create and manipulate tables
Filter and sort data
Apply formulas
Use the correct syntax to insert functions
Create and format cells and ranges
Order and group cells and ranges
Apply cell ranges and references in formulas and functions
Summarize data with functions
Apply conditional logic in functions
Format and modify text with functions
Create and format charts and objects

This hands-on course is taught by a certified Microsoft Master Instructor. Participants will receive authorized Microsoft manuals and Microsoft approved practice exercises.
All participants will be provided with laptops for the course.
What previous participants said:
“Informative! I’ve learned a lot.”
“Content excellent.”
“Very thorough, I feel pretty proficient.”

Register Now!

Microsoft Excel (Advanced) - Prince George
2019-05-07 08:00 - 16:30 | ICBA Office (Prince George), 2666 Queensway, Prince George, British Columbia, V2L 1N2, Canada
Save hours and minimize errors by learning how to manage data and reporting through tables and with the use of pivot tables, graph data and be able to make dynamic charts and identify trends with trend lines.
Build error proof data entry sheets through the use of data validation techniques so that reporting is virtually error free. Learn to use advanced functions like Vlookup, If function and build complex nested functions with ease.
Come with your questions and learn tips, shortcuts and how to program simple macros from a Microsoft Master Instructor.
The following list summarizes skills that participants will be comfortable with after this course.

 Use advanced functions such as
o Information
o Lookup and reference
o Conditional logic
o Conditional summary
 Add data validation, including using pick lists
 Remove duplicate data; circle invalid data
 Create, modify or remove a hyperlink
 Work with shared workbooks
 Add protection to workbooks and worksheets
 Track changes
 Use data analysis tools
 Create and modify PivotTables or PivotCharts
 Use slicers with PivotTables
 Create and run Macros
 Add form controls

This hands-on course is taught by a certified Microsoft Master Instructor. Participants will receive authorized Microsoft manuals and Microsoft approved practice exercises.
All participants will be provided with laptops for the course.
Max participants: 12
Register Now!

Microsoft PowerPoint - Prince George
2019-05-08 08:00 - 16:30 | ICBA Office (Prince George), 2666 Queensway, Prince George, British Columbia, V2L 1N2, Canada
Learn PowerPoint’s commands, functions and capabilities and how to quickly create powerful and compelling presentations. The course starts with strategies on how to very quickly outline and create the “story” and then to learn to present the information in creative, clear and professional increments.
By the end of this workshop you will be able to:

Strategize how to structure and create a successful presentation
Format a presentation using Slide Masters
Customize presentation options and views
Set-up and run a slideshow
Insert and format shapes and slides
Insert and format images, media and SmartArt
Insert hyperlinks, media clips and sound
Apply transitions and animations
Set timing for automatic transitions and animations
Manage multiple presentations
Presentation tools and annotations
Protect and share presentations
Create notes and handouts

This hands-on course is taught by a certified Microsoft Master Instructor. Participants will receive authorized Microsoft manuals and Microsoft approved practice exercises.

All participants will be provided with laptops.
Register Now!

Introduction to Blueprint Reading - Kelowna
2019-05-15 08:00 - 16:30 | Kelowna (TBA), Kelowna, British Columbia, Canada

Civil Blueprint Reading - Langley
2019-05-25 07:30 - 16:30 | Langley (TBA)
Participants will learn how to read a set of civil construction blueprints, drawing specifications and general notes. Using various samples of civil blueprints, participants will gain experience and practical knowledge for their day-to-day work on construction projects.
At the end of the course participants will be able to:
• Have an elementary knowledge of civil blueprint reading as it relates to building construction projects
• Understand in general terms the design process and the role of design professionals
• Understand how Building Codes and Bylaws impact blueprints
• Understand specifications and the contractual hierarchy
• Be able to find trade information using blueprints
• Be able to answer basic construction questions related to the layout and installation of materials
• Be able to identify elementary problems or short comings of the blueprints you are using
• Be familiar with civil, architectural and structural drawings, and how they fit together
• Understand and be able to use architectural & metric scale rules
• Understand how to convert metric dimensions to architectural (imperial) dimensions
• Know what a floor plan, section, detail, profile and elevation are
• Understand symbols, notations, abbreviations and material schedules
• Be able to work with the drawings to obtain basic information on dimensions, finishes, details, area calculations, and the ability to do simple materialtakeoffs
Audience: Ideal for those who have little or no background in civil blueprint reading.
The instructor: Mark Waters, CTech., GSC has worked in the civil and environmental construction industry for the past 30 years and is an experienced project manager and
estimator. He graduated from the BCIT Geomatics Technician program with honours in 1996 and joined the Applied Science Technologists and Technicians Association of BC (ASTTBC) in 1997. Mark spent many of his earlier civil construction years as a project superintendent
and engineering surveyor.
Register Now!

Bluebeam Revu: Basics - Burnaby
2019-05-28 08:00 - 16:30 | Executive Suites Hotel & Conference Centre, 4201 Lougheed Highway, Burnaby, British Columbia, V5C 3Y6, Canada
This course teaches you the fundamentals of using Bluebeam’s award-winning software, Revu. With Revu, you’ll be able to expedite the review and approval process between project team members or clients, quickly and easily.

Topics to be covered:

Introduction to Revu
Overview of the Revu Interface, Navigation and Profiles
The Markup Tools
Revu Stamps
The Tool Chest
The Markups List
PDF Creation
Document Management and Setup
Introduction to Studio
Studio Sessions
Studio Projects

Who should attend:
Field and office professionals in the construction, engineering and architecture industry.

Instructor:
Curtek is a technical consulting firm specializing specifically in Bluebeam Revu and servicing the Western Canada market. We offer multiple training sessions to help our clients work effectively with their digital documents. Our instructor, Morgan Garry, has a Bachelor of Science degree in Construction Management from BYU-Idaho and over 10 years of commercial construction experience in project management and estimating. Morgan is also the first and only Bluebeam Certified Instructor in Canada.

What previous participants said:
“Helped a lot! Morgan was thorough easy to understand.”
“Covered all the basic, good introduction.”
“Calm, organized, helpful instructor.”
“I have been using Bluebeam for 6 years, and was a little concerned that I would find the basic course a little repetitive. However, after yesterday, I walked away with so many tips and tricks to use Bluebeam more efficiently, and even a lot of new functions that I had no idea that Bluebeam even did.”
MPORTANT: You will need to provide your own laptop with Bluebeam Revu installed and a scroll wheel mouse. You can download the software for a trial version for 30 days at http://www.bluebeam.com/InstRevuTRIAL

If you don’t have your own laptop with Bluebeam Revu, we can provide a training laptop for the day ($25 rental fee). The total number of training laptops is limited and will be provided to those who reserve them first.

To reserve a training laptop, email or call Kerry at 604-293-2339 or kerry.vital@trainingnetwork.ca
Register Now!

Estimating with Bluebeam Revu - Burnaby
2019-05-29 08:00 - 16:30 | Executive Suites Hotel & Conference Centre, 4201 Lougheed Highway, Burnaby, British Columbia, V5C 3Y6, Canada

Field Quality Control and Deficiency Management with Bluebeam Revu - Burnaby
2019-05-30 08:00 - 16:30 | Executive Suites Hotel & Conference Centre, 4201 Lougheed Highway, Burnaby, British Columbia, V5C 3Y6, Canada
This full-day course provides you and your staff with the knowledge and skills to get the quality of work on your projects under control and developing an effective tracking system that is easy to manage.
Topics covered include:
• Creating QC Floor Plans with Spaces
• Creating Deficiency Tool Sets
• Statuses for Deficiency Management
• Adding images to your QC documents
• Deficiency Inspections
• Deficiency Reporting
• PDF Forms
• Classroom Exercises

Taking the Bluebeam Revu Basics course is not mandatory as a prerequisite, however it is strongly recommended. Several of the topics taught in these courses are built on the foundation of several topics taught in the basics course.

Instructor:
Curtek is a technical consulting firm specializing specifically in Bluebeam Revu and servicing the Western Canada market. We offer multiple training sessions to help our clients work effectively with their digital documents. The instructor, Morgan Garry, has a Bachelor of Science degree in Construction Management from BYU-Idaho and over 10 years of commercial construction experience in project management and estimating. Morgan is also the first and only Bluebeam Certified Instructor in Canada.

IMPORTANT: You will need to provide your own laptop with Bluebeam Revu installed and a scroll wheel mouse. You can download the software for a trial version for 30 days at http://www.bluebeam.com/InstRevuTRIAL

If you don’t have your own laptop with Bluebeam Revu, we can provide a training laptop for the day ($25 rental fee). The total number of training laptops is limited and will be provided to those who reserve them first.

To reserve a training laptop, email or call Kerry at 604-293-2339 or kerry.vital@trainingnetwork.ca

Register Now!

Document Control with Bluebeam Revu - Burnaby
2019-05-31 08:00 - 16:30 | Executive Suites Hotel & Conference Centre, 4201 Lougheed Highway, Burnaby, British Columbia, V5C 3Y6, Canada
Document Control with Revu is a Curtek course that teaches you and your staff Document Control practices using Bluebeam Revu. This full-day training course provides you and your staff with the knowledge and skills to take plain PDF construction documents and create smart PDF’s that can give project teams accurate and up to date information at all times.

This course promises to shorten your staff’s learning curve and maximize your investment in Revu by:

• Providing hands-on instruction by a Bluebeam Certified Instructor
• Focusing on the foundational skills needed to use Revu to achieve greater productivity
• Delivering frequent skills reinforcement through hands-on classroom activities, contextual feedback, quizzing and discussion
• Applying a progressive learning structure where each learning module builds on previous learning objectives
• Equipping learners with takeaway reference material, including practice files and a reference workbook to use beyond the classroom

Course Outline

Module 1: Intro
• Welcome and introductions
• Course overview

Module 2: Thumbnails Tab
• Refresher on the Thumbnails Tab
• Changing Page Labels Manually
• Changing Page Labels with AutoMark™
• Classroom Exercise – Labelling Pages
• Creating Bookmarks with AutoMark™
• Classroom Exercise – Bookmarking your documents
• Extract Pages
• Combine Pages
• Classroom Exercise – Going from individual sheets to a combined
set and back again

Module 3: Creating a SMART PDF
• Raster vs. Vector data
• Basic Hyperlinks
• Classroom Exercise
• Behind Hyperlinks
• Classroom Exercise
• Creating Hyperlinks form Search Results
• Classroom Exercise
• Batch Link
• Classroom Exercise

Module 4: Documenting Changes
• Compare Documents
• Classroom Exercise
• Overlay Pages
• Classroom Exercise
• Batch Overlay & Compare
• Classroom Exercise

Module 5: Updating Page Content
• What is Slip Sheeting?
• Replace Pages
• Classroom Exercise
• Batch Slip Sheeting
• Classroom Exercise

Module 6: Bluebeam Sets
• Intro to Sets
• Creating a New Set
• Set Categories
• Tags
• Adding more/revised files to a Set
• Classroom Exercise
• Publishing Sets
• Sharing Sets with Project Teams
• Drawing Logs
• Classroom Exercise

Module 7: Looking Back
• Review topics taught in this course
• Final classroom exercise – can you do it all together now?

Who should attend:
Field and office professionals in the construction, engineering and architecture industry.

Taking the Bluebeam Revu Basics course is not mandatory as a prerequisite, however it is strongly recommended. Several of the topics taught in these courses are built on the foundation of several topics taught in the basics course.

Instructor:
Curtek is a technical consulting firm specializing specifically in Bluebeam Revu and servicing the Western Canada market. We offer multiple training sessions to help our clients work effectively with their digital documents. The instructor, Morgan Garry, has a Bachelor of Science degree in Construction Management from BYU-Idaho and over 10 years of commercial construction experience in project management and estimating. Morgan is also the first and only Bluebeam Certified Instructor in Canada.

IMPORTANT: You will need to provide your own laptop with Bluebeam Revu installed and a scroll wheel mouse. You can download the software for a trial version for 30 days at http://www.bluebeam.com/InstRevuTRIAL

If you don’t have your own laptop with Bluebeam Revu, we can provide a training laptop for the day ($25 rental fee). The total number of training laptops is limited and will be provided to those who reserve them first.

To reserve a training laptop, email or call Kerry at 604-293-2339 or kerry.vital@trainingnetwork.ca

Register Now!

FREE BREAKFAST - Large Surface Material Removal - Burnaby
2019-06-13 06:30 - 08:00 | Ultimate Tools, 3847 1st Avenue, Burnaby, British Columbia, V5C 3V6, Canada
Do your projects involve material removal during renovation and reconstruction?

Join us for breakfast on June 13th and learn more about the removal of concrete, screed and coatings on hard sublayers with maximum efficiency and perfect dust extraction with the Festool RG 130 diamond grinder. It will rapidly flatten large lumps or bumps in concrete surfaces or screeds, smooth transfers, remove plaster, old tile cement, paint, glue residues, coatings and will clean concrete and wooden surfaces.

Achieve ideal results more quickly with material removal close to the edge and right up to the wall, while the wall stop and 0.5 mm disc set back make damage to walls and edges impossible.

Vibration dampening on the auxiliary handle ensures less fatigue and the handle is adjustable with the ability to fold back completely.
Constant electronics maintain the speed under load; guaranteeing a consistent work rate and stock removal.

There is no fee to attend but as space is limited, please RSVP below.
Register Now!

Microsoft Project - Burnaby
2019-08-08 08:00 - 2019-08-09 16:30 | Accent Inn, 3777 Henning Drive, Burnaby, British Columbia, V5C 6N5, Canada

Introduction to Blueprint Reading - Kelowna
2019-09-13 08:00 - 16:30 | Fairfield Inn and Suites Kelowna, 1655 Powick Road, Kelowna, BC, V1X 4L1, Canada

Microsoft Excel for Business - Victoria
2019-09-24 08:00 - 16:30 | Sandman Hotel Victoria, 2852 Douglas Street, Victoria, British Columbia, V8T 4M5, Canada

Bluebeam Revu: Basics - Burnaby
2019-09-24 08:00 - 16:30 | Accent Inn, 3777 Henning Drive, Burnaby, British Columbia, V5C 6N5, Canada

Microsoft Excel (Advanced) - Burnaby
2019-09-25 08:00 - 16:30 | Accent Inn, 3777 Henning Drive, Burnaby, British Columbia, V5C 6N5, Canada
Save hours and minimize errors by learning how to manage data and reporting through tables and with the use of pivot tables, graph data and be able to make dynamic charts and identify trends with trend lines.
Build error proof data entry sheets through the use of data validation techniques so that reporting is virtually error free. Learn to use advanced functions like Vlookup, If function and build complex nested functions with ease.
Come with your questions and learn tips, shortcuts and how to program simple macros from a Microsoft Master Instructor.
The following list summarizes skills that participants will be comfortable with after this course.

 Use advanced functions such as
o Information
o Lookup and reference
o Conditional logic
o Conditional summary
 Add data validation, including using pick lists
 Remove duplicate data; circle invalid data
 Create, modify or remove a hyperlink
 Work with shared workbooks
 Add protection to workbooks and worksheets
 Track changes
 Use data analysis toolsc
 Create and modify PivotTables or PivotCharts
 Use slicers with PivotTables
 Create and run Macros
 Add form controls

This hands-on course is taught by a certified Microsoft Master Instructor. Participants will receive authorized Microsoft manuals and Microsoft approved practice exercises.
All participants will be provided with laptops for the course.
Max participants: 12
Register Now!

Document Control with Bluebeam Revu - Burnaby
2019-09-27 08:00 - 16:30 | Accent Inn, 3777 Henning Drive, Burnaby, British Columbia, V5C 6N5, Canada

Microsoft Outlook - Burnaby
2019-10-01 08:00 - 16:30 | Accent Inn, 3777 Henning Drive, Burnaby, British Columbia, V5C 6N5, Canada
Learn to navigate quickly, and far less, through Outlook and how to create a powerful single page dashboard that will let you strategically manage all your appointments, tasks, email and follow-up calls on a single page.
The following list summarizes skills that participants will be comfortable with after this course:

Understand how Outlook is set up and the types of information it can track
Create, format and send messages
Create or modify signatures for e-mail
Choose customized outlook settings and views
Organize and manage messages using quick steps
Utilize the powerful search tools in outlook
Create rules and out of office notices
Use the To Do bar to manage tasks
Manage multiple calendars
Create and organize tasks, appointments, meetings and events
Create and manage notes, tasks and journals
Utilize options such as voting buttons, flags or level of importance
Create contacts and groups

This hands-on course is taught by a certified Microsoft Master Instructor. Participants will receive authorized Microsoft manuals and Microsoft approved practice exercises.
All participants will be provided with laptops for the course.
Max participants: 12
What previous participants said:
“Great teaching style!”
“Well done, good course.”

Register Now!

Microsoft Project - Whitehorse
2019-10-23 08:00 - 2019-10-24 16:30 | Coast High Country Inn & Yukon Convention Centre, 4051 4th Avenue, Whitehorse, Yukon, Y1A 1H1, Canada

Civil Blueprint Reading - Burnaby
2019-11-18 08:00 - 16:30 | Accent Inn, 3777 Henning Drive, Burnaby, British Columbia, V5C 6N5, Canada

Microsoft Project - Victoria
2019-11-20 08:00 - 2019-11-21 16:30 | Sandman Hotel Victoria, 2852 Douglas Street, Victoria, British Columbia, V8T 4M5, Canada

Microsoft Excel for Business - Burnaby
2019-12-03 08:00 - 16:30 | Accent Inn, 3777 Henning Drive, Burnaby, British Columbia, V5C 6N5, Canada
