Construction Industry Training Network

Responsibilities of Joint Health & Safety Committees - Burnaby
2021-06-16 08:00 - 16:30, 2021-07-14 08:00 - 16:30, 2021-08-18 08:00 - 16:30, 2021-09-15 08:00 - 16:30, 2021-10-13 08:00 - 16:30, 2021-11-17 08:00 - 16:30, 2021-12-15 08:00 - 16:30 (America/Vancouver) | Universal Health and Safety, 201-4199 Lougheed Hwy, Burnaby, British Columbia, V5C 3Y6, Canada
On April 3, 2017, changes to the Occupational Health and Safety Regulation regarding joint health and safety committees and worker health and safety representatives took effect. All new joint committee members selected on or after April 3, 2017 must receive eight hours of training. This course will help participants fulfill the new requirement.
Participants will:

Know how to use the OHS Regulation and WC Act to access health & safety requirements;
Explain the roles and functions of the Joint Committee and the Worker Representatives;
Learn how to perform an incident investigation;
Learn how to perform a formal site inspection; and
Develop a foundation in knowledge to:

Promote workplace health and safety
Assist in ensuring the health and safety program elements are implemented;
Conduct and participate in Joint Committee Meetings; and
Work cooperatively to address workers’ health and safety concerns.

Topics covered:

Use of WorkSafe OHS Regulation;
Joint Health and Safety committee and workers representatives;
OHS Program;
Safety Inspections;
Incident investigations;
Refusal of unsafe work;
How to work as a committee;
Different types of recommendations; and
Hazard management.

Due to WorkSafe regulations around the required number of training hours, this workshop will begin at 8:00 AM sharp. Late arrivals will not be accepted.
What previous participants have said:
“The facilitator was the key to making this class a success. It could be dry, boring and tedious, but not with this instructor!”
“Very good, informative and interactive.”
Register Now!

Frame Scaffold Competent Person Training - Richmond
2021-06-19 08:00 - 16:30 | Canada Scaffold University, 11331 Twigg Place, Richmond, BC, V6V 3C9, Canada
Frame scaffolding is one of the most common types of scaffolding seen on construction sites worldwide. Typically manufactured from round tubing, the frame scaffolding is available in several different configurations, from a section that contains both a ladder and a walk-through portal to sections that are totally walk-through and sections that resemble a ladder.
Canada Scaffold University’s SAIA accredited Frame Scaffold course will provide demonstration and practice with the typical methods of constructing frame scaffolding, including:

Identifying types and components of Frame Scaffold
Identify standard usage of Frame Scaffold
How Frame Scaffolds are erected using Code of Safe Practice
Determining equipment list and erect a multi-lift tower
Work orders
Identify and understand Rolling Tower Frame Scaffold
Erect and dismantle a Rolling Frame Scaffold using Code of Safe Practice
Identify scaffold configuration

Participants who score 70% or higher on the Competent Person written exam and display competency building frame scaffolding will receive a certificate of completion and wallet card from the SAIA Training Program, certifying completion of Competent Person Training in the erection of frame scaffolds.

Certification: Participation in the practical component and passing a final exam is required to qualify for the 3-year SAIA Competent Person certification.

Who should attend: Anyone working on scaffolds, those who supervise work on and near scaffolds, and those who supervise the erecting, altering, and dismantling of scaffolds.

No prerequisites required

Please note: All participants will be required wear a non-medical face-mask whilst in the classroom environment. Physical distancing will be maintained for the course duration, however, certain class exercises may involve participants and the instructor being physically closer than 6-feet. This is why participants and instructors are required to wear a non-medical face-mask. When strict physical distancing is not possible, instructors will also ask all participants to sanitize their hands immediately before and after such exercises.

Instructor: Kelly Clancy is the Construction Safety Officer at Canada Scaffold Supply. He started his career at Canada Scaffold in 1998 as a Foreman and has worked as a Scaffold Installer, progressing to his current position. Kelly acquired his CSO Certification in 2018 and is focused on safety and compliance in scaffold installation. He manages the Scaffold Install crew as well as overseeing site safety plans, and performing hazard and risk assessments.

Kelly received his Competent Person Training (System Scaffold) from the Scaffold & Access Industry Association. He also successfully completed the Train the Trainer Facilitator Skills Workshop at SAIA. Kelly teaches the Supported Scaffold Competent Person Training (1-day) course at Canada Scaffold University (CSU).

Register Now!

System Scaffold Competent Person Training - Richmond
2021-06-23 08:00 - 16:30 | Canada Scaffold University, 11331 Twigg Place, Richmond, BC, V6V 3C9, Canada
A system scaffolding structure is essentially a frame structure using a specialized modular connection and has evolved from the general principles of tube and clamp scaffolding.

Canada Scaffold University’s SAIA approved Systems Scaffold course will provide demonstration and practice with the typical methods of constructing systems scaffolding, including:

Identifying types and components of System Scaffold
Identify standard usage of System Scaffold
How System Scaffolds are erected using Code of Safe Practice
Identify and understand specialty usage of System Scaffold including Circular, Cantilevered, Enclosed and Hanging
Understanding System Scaffold Tower building
Erect and dismantle a System Scaffold Tower using Code of Safe Practice
Identify scaffold configuration
Hands-on practical instruction in the scaffold yard

This course complies with CSA Z-797 “Code of Practice for Access Scaffolds”.

Participants who score 70% or higher on the Competent Person written exam and display competency building system scaffolding will receive a certificate of completion and wallet card from the SAIA Training Program, certifying completion of Competent Person Training in the erection of system scaffolds.

Certification: Participation in the practical component and passing a final exam is required to qualify for the 3-year SAIA Competent Person certification.

Who should attend: Anyone working on scaffolds, those who supervise work on and near scaffolds, and those who supervise the erecting, altering, and dismantling of scaffolds.

No prerequisites required

Please note: All participants will be required wear a non-medical face-mask whilst in the classroom environment. Physical distancing will be maintained for the course duration, however, certain class exercises may involve participants and the instructor being physically closer than 6-feet. This is why participants and instructors are required to wear a non-medical face-mask. When strict physical distancing is not possible, instructors will also ask all participants to sanitize their hands immediately before and after such exercises.

Instructor: Kelly Clancy is the Construction Safety Officer at Canada Scaffold Supply. He started his career at Canada Scaffold in 1998 as a Foreman and has worked as a Scaffold Installer, progressing to his current position. Kelly acquired his CSO Certification in 2018 and is focused on safety and compliance in scaffold installation. He manages the Scaffold Install crew as well as overseeing site safety plans, and performing hazard and risk assessments.

Kelly received his Competent Person Training (System Scaffold) from the Scaffold & Access Industry Association. He also successfully completed the Train the Trainer Facilitator Skills Workshop at SAIA. Kelly teaches the Supported Scaffold Competent Person Training (1-day) course at Canada Scaffold University (CSU).

Register Now!
